QFP100封装的SPC560系列512KB / 1MB器件的子板/适配器板

SPC560PADPT100S

设计简介

The SPC560PADPT100S and SPC560PADPT144S are evaluation systems supporting the STMicroelectronics SPC560Pxx family of automotive microprocessors.

The complete system consists of an SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.
The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCI and LIN). The mini modules itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed.
The MCU is not included, it must be purchased separately. Please contact your sales representative for more details.

主要特性

SPC560Pxx modular evaluation system
On/off power switch with LED indicators
Board power supply: 12 VDC external supply voltage
Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
Up to two CAN channels with jumper enable
- One CAN channel with High-Speed transceiver and DB9 male connector
- One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
Up to two LIN channels with jumper enable
- One channel with transceiver and pin header connector populated
- One channel with footprints only
One SCI channel with jumper enables, transceiver and DB9 female connector
Up to two FlexRay channels with jumper enables
- One channel with transceiver and DB9 male connector
- One channel with footprint only

Four user push buttons with jumper enable and polarity selection
Four user LED’s with jumper enables
One potentiometer for analog voltage input
Pin array for accessing all I/O signals
Expansion connectors for accessing all I/O signals
Prototyping area with 0.1” spacing and SOIC footprint
Specifications:
- Board size 110 mm x 75 mm
- 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory
Standard connectors to SPC56XXMB

参考设计下载

！注意：请使用浏览器自带下载，迅雷等下载软件可能无法下载到有效资源。

群聊设计，与管理员及时沟通

欢迎加入EEWorld参考设计群，也许能碰到搞同一个设计的小伙伴，群聊设计经验和难点。入群方式：微信搜索“helloeeworld”或者扫描二维码，备注：参考设计，即可被拉入群。另外，如您在下载此设计遇到问题，也可以微信添加“helloeeworld”及时沟通。

网友评论

点击登录后，参与评论

版权和使用说明

热门项目

热门活动更多

下载中心更多

查找数据手册?

EEWorld Datasheet 技术支持

大学堂更多

论坛推荐更多

更新时间2024-11-18 06:08:41

STM32超值型系列再添新品——Flash容量扩展至512KB
意法半导体（ST）提升入门级32位微控制器的性能和价值 STM32超值大容量系列微控制器为用户提供高达512 KB闪存和 144引脚封装，支持成本敏感型终端产品升级换代中国，2010
新唐出了个MPUMA35D1系列芯片最大封装512MB内存 Zero2还有什么优势呢？
新唐出了个MPUMA35D1系列芯片最大封装512MB内存 MA35D1系列，目前有四种型号，分别如下 MA35D16F987C 512MB MA35D16A887C 256MB
测评汇总：米尔 i.MX93 开发板，基于MPU+MCU+NPU三芯一体的NXP嵌入式处理器
活动详情：【米尔 i.MX93 开发板，基于MPU+MCU+NPU三芯一体的NXP嵌入式处理器】更新至 2024-09-06 测评报告汇总： @lijinlei 【米尔 NXP i.MX93
新唐NUC100开发板上自带的nu-link能否用来烧写新唐其他系列的单片机
请教：新唐NUC100开发板上自带的nu-link能否用来烧写新唐其他系列的单片机，例如新唐8051系列？
国产FPGA有奖直播：安路全新FPSoC产品SF1系列（FPGA+MCU），Demo板介绍和案例解析
直播时间： 3月13日（周一）晚8:00-9:00 直播主题：安路科技SF102 DEMO板应用介绍直播内容：介绍安路科技最新推出的SF1系列FPSoC SF102 DEMO板，现场演示两个典型应用例程展示
寻QFP-40封装的单片机
请问哪家有QFP-40PIN封装的单片机,型号是什么?谢谢!! 寻QFP-40封装的单片机楼主为什么第一要求是封装呢？一般情况下，封装是在保证系统性能的情况再考虑的事。

Datasheet 更多

精选电路图更多

QFP100封装的SPC560系列512KB / 1MB器件的子板/适配器板

SPC560PADPT100S

EEWORLD参考设计中心