QFP144封装的SPC560系列512KB / 1MB器件的子板/适配器板

SPC560PADPT144S

设计简介

The SPC560PADPT100S and SPC560PADPT144S are evaluation systems supporting the STMicroelectronics SPC560Pxx family of automotive microprocessors.

The complete system consists of an SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.
The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCI and LIN). The mini modules itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed.
The MCU is not included, it must be purchased separately. Please contact your sales representative for more details.

主要特性

SPC560Pxx modular evaluation system
On/off power switch with LED indicators
Board power supply: 12 VDC external supply voltage
Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
Up to two CAN channels with jumper enable
- One CAN channel with High-Speed transceiver and DB9 male connector
- One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
Up to two LIN channels with jumper enable
- One channel with transceiver and pin header connector populated
- One channel with footprints only
One SCI channel with jumper enables, transceiver and DB9 female connector
Up to two FlexRay channels with jumper enables
- One channel with transceiver and DB9 male connector
- One channel with footprint only

Four user push buttons with jumper enable and polarity selection
Four user LED’s with jumper enables
One potentiometer for analog voltage input
Pin array for accessing all I/O signals
Expansion connectors for accessing all I/O signals
Prototyping area with 0.1” spacing and SOIC footprint
Specifications:
- Board size 110 mm x 75 mm
- 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory
Standard connectors to SPC56XXMB

参考设计下载

！注意：请使用浏览器自带下载，迅雷等下载软件可能无法下载到有效资源。

群聊设计，与管理员及时沟通

欢迎加入EEWorld参考设计群，也许能碰到搞同一个设计的小伙伴，群聊设计经验和难点。入群方式：微信搜索“helloeeworld”或者扫描二维码，备注：参考设计，即可被拉入群。另外，如您在下载此设计遇到问题，也可以微信添加“helloeeworld”及时沟通。

网友评论

点击登录后，参与评论

版权和使用说明

热门项目

热门活动更多

下载中心更多

查找数据手册?

EEWorld Datasheet 技术支持

大学堂更多

论坛推荐更多

更新时间2024-11-22 14:15:04

STM32超值型系列再添新品——Flash容量扩展至512KB
意法半导体（ST）提升入门级32位微控制器的性能和价值 STM32超值大容量系列微控制器为用户提供高达512 KB闪存和 144引脚封装，支持成本敏感型终端产品升级换代中国，2010
新唐出了个MPUMA35D1系列芯片最大封装512MB内存 Zero2还有什么优势呢？
新唐出了个MPUMA35D1系列芯片最大封装512MB内存 MA35D1系列，目前有四种型号，分别如下 MA35D16F987C 512MB MA35D16A887C 256MB
HCS12系列 MC9S12DP512MPVE微控制器 16Bit 闪存 112LQFP
MC9S12DP512MPVE是一款基于增强的HCS12 CPU的16位微控制器，具有CISC架构，最大工作频率为25MHz。
ATmega2560和ATxmega128系列单片机差别大吗？
现在有一个项目要求用到5个串口以前用的是ATmega2560 只有4个找到一个IIC转串口的模块可以扩展2个 ATxmega128系列的有8个串口在官网下的datasheet
飞思卡尔推出KL15 系列 32 位 48 Mhz 128 kB 闪存 16 kB SRAM 微控制器 -
MKL15Z128VLK4是市场领先、高度集成的超低功耗32位微控制器，采用增强型Cortex-M0+(CM0+)内核平台。
读SD卡，单片机一定要有512B的数据缓存吗
手头上只有STC89c52和msp430G2553 这俩片子都只有512的RAM··能读SD卡吗。

Datasheet 更多

精选电路图更多

QFP144封装的SPC560系列512KB / 1MB器件的子板/适配器板

SPC560PADPT144S

EEWORLD参考设计中心