BGA386封装的SPC58 H线插座微型模块

SPC58NHADPT386S

设计简介

The SPC58NHADPT386S Premium Evaluation Boards System supports the 32-bit SPC58 H line STMicroelectronics' automotive microcontrollers.

The complete system consists of an SPC58XXMB/SPC57XXMB motherboard and an SPC58NHADPT386S daughter card which plugs into the motherboard. Different daughter cards are available for evaluating the whole family of device in all supported packages. All daughter cards are similar in design and concept.
The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCI, LIN and FlexRAY). The daughter card itself can be used as a standalone unit when access to the I/O pins or peripherals is not needed.
The MCU is not included, it must be purchased separately. Please contact your sales representative for more details.

主要特性

SPC58NHADPT386S
- Open top MCU socket for BGA 386 package
- Flexible MCU clocking options:
  - 40 MHz crystal EVB clock circuit
  - 8 MHz EVB clock oscillator circuit
  - External clock via SMA connector
- User reset switch with LEDs status
- 5.0 V standalone supply with on board 1.2 V and 3.3 V regulator
- 1 GB Ethernet interface with RJ45
- eMMC onboard 8GB Flash memory
- eMMC SD card reader JEDEC/MMC standard version 5.0 compliant
- USB with micro AB type connector
- 10-pin Interprocessor SIPI connector
- 14-pin standard JTAG connector
- 38-pin Mictor Nexus parallel connector
- 10-pin JTAG/LFAST SAMTEC connector
- 12x2 /I/O connector: GPIO, AN, SPI, CAN, LIN (No transceiver)
- Module dimension: 157 mm X 114.3 mm
- Standard connectors to SPC58XXMB/SPC57XXMB
SPC58XXMB/SPC57XXMB
- SPC58 modular evaluation system
- Single 12 V external power supply
- Four on-board regulators:
  - 5.0 V, 3.3 V and 1.25 V switching regulators
  - 5 V linear regulator for the ADC supplies and references
- Master power switch and regulator status LEDs
- Two 240-way high-density expansion connectors for MCU daughter cards
- All MCU signals readily accessible at a port-ordered group of 0.1” pitch headers
- RS232/SCI physical interface and standard DB9 female connector
- Two FlexRAY channels interface with a DB9 connector (for both transceivers) and two alternative connectors
- LINFlexD interface with two different style connectors
- Two high speed CAN-FD channels and two female standard DB9 connectors
- Ethernet interface with a standard RJ45 Ethernet connector
- One potentiometer for analog voltage input and four user switches and 4 user LEDs, freely connectable

参考设计下载

！注意：请使用浏览器自带下载，迅雷等下载软件可能无法下载到有效资源。

群聊设计，与管理员及时沟通

欢迎加入EEWorld参考设计群，也许能碰到搞同一个设计的小伙伴，群聊设计经验和难点。入群方式：微信搜索“helloeeworld”或者扫描二维码，备注：参考设计，即可被拉入群。另外，如您在下载此设计遇到问题，也可以微信添加“helloeeworld”及时沟通。

网友评论

点击登录后，参与评论

版权和使用说明

热门项目

热门活动更多

下载中心更多

查找数据手册?

EEWorld Datasheet 技术支持

大学堂更多

论坛推荐更多

更新时间2024-11-14 07:15:06

LM386中文资料电路图及引脚封装图
LM386是专为低损耗电源所设计的功率放大器集成电路。它的内建增益为20，透过pin 1 和pin8脚位间电容的搭配，增益最高可达200。
单片机BGA封装的电路板-无法烧录
制作了一版电路板，用到了BGA封装的msp430f5529（球心间距0.5mm，只用到了20个管脚，所以打得盘中孔），用CCS仿真时出现了“unknown device”的问题，仔细检查了电路，发现了两个问题
测评汇总：米尔 i.MX93 开发板，基于MPU+MCU+NPU三芯一体的NXP嵌入式处理器
活动详情：【米尔 i.MX93 开发板，基于MPU+MCU+NPU三芯一体的NXP嵌入式处理器】更新至 2024-09-06 测评报告汇总： @lijinlei 【米尔 NXP i.MX93
求STC8H单片机的封装图
小白一个，希望各位大哥指点指点求STC8H单片机的封装图 PCB封装图可以找LQFP的进行修改，或根据图进行软件制作，画
ST延长SPC56车规MCU长期供货承诺，推动汽车电子创新
半导体供应商意法半导体宣布延长在全球汽车动力总成、底盘和车身应用中部署量达数百万的SPC56车规微控制器（MCU）的长期供货承诺。
求51单片机控制GPRS模块实现温度的远程控制的程序，GPRS模块最好是封装好的
求51单片机控制GPRS模块实现温度的远程控制的程序，GPRS模块最好是封装好的，那样看起来简单些，拜求！

Datasheet 更多

精选电路图更多

BGA386封装的SPC58 H线插座微型模块

SPC58NHADPT386S

EEWORLD参考设计中心