The STEVAL-ILL084V1 product evaluation board is based on the LED6000 monolithic current source for high power LED driving. The floating boost topology can benefit from the LED6000 wide input voltage range to drive many power LED in series. The LED6000 is a 61 V asynchronous switching regulator with embedded power MOSFET, designed to supply up to 3 A DC currents depending on the application conditions. The 250 mV typical RSENSE voltage drop, embedded switch-over feature on the VBIAS pin and light load management (pulse skipping) maximize power conversion efficiency across the entire load range. Digital dimming is implemented by driving the dedicated DIM pin.
The current limit threshold and the switching frequency are adjustable for application optimization. The device includes an internal 250 kHz oscillator that can be externally adjusted up to 1.5 MHz. The size of the overall application is minimized thanks to the high switching frequency and its compatibility with ceramic output capacitors. Two LED6000 regulators can be synchronized in a 180° out-of-phase configuration for reduced total input RMS current.
主要特性
！注意：请使用浏览器自带下载，迅雷等下载软件可能无法下载到有效资源。
| 器件 | 类型 | 描述 | 数据手册 |
|---|---|---|---|
| LED6000 | LED升压稳流器 | 具有调光功能的3 A、61 V单片式电流源 | 点击下载 |
欢迎加入EEWorld参考设计群，也许能碰到搞同一个设计的小伙伴，群聊设计经验和难点。 入群方式：微信搜索“helloeeworld”或者扫描二维码，备注：参考设计，即可被拉入群。 另外，如您在下载此设计遇到问题，也可以微信添加“helloeeworld”及时沟通。
EEWorld Datasheet 技术支持
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
ATMEGA48A-CCUR
