电压调节器输出上的电压瞬态特性,以及与硅离子撞击相关的能量转移,是空间应用中的一个非常关键的问题。较大的下冲可能会导致存储器和微处理器运行不稳定,而过大的过冲可能会导致 CMOS 器件性能下降,甚至损坏。例如,对于大多数 FPGA,建议工作电压为 1.5V,最大工作电压为 1.5V。限制为 1.6V(在某些应用中限制为 1.575V 以保持进一步的安全裕度)。后者适用于静态和动态操作条件
说明
-
Characteristics of the voltage transient on the output of a voltage regulator, as a consequence the transfer of energy related to an ion strike with the silicon, is a very critical issue in space applications. Large undershoots can cause erratic operation in memories and microprocessors, while overshoots of excessive amplitude can lead to the degradation - or even the destruction - of CMOS devices. As an example, for most FPGA the recommended operating voltage is 1.5V and the max. limit 1.6V (in some applications restricted to 1.575V to keep further safety margin). This latter applies to both static and dynamic operating conditions