The STEVAL-ISB032V1 is a product evaluation board based on the STNS01, which is a linear charger for single-cell Li-Ion batteries integrating an LDO regulator and several battery protection functions. The device uses a CC/CV algorithm to charge the battery. The fast-charge current can be programmed using an external resistor. Pre-charge current and termination current are scaled accordingly. The floating voltage value is 4.2 V. The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power.
The STNS01 integrates over-charge, over-discharge and overcurrent protection circuitry to prevent the battery from being damaged under fault conditions. It also features a charger enable input to stop the charging process when battery overtemperature is detected by external circuitry.
When shutdown mode is activated, the battery power consumption is reduced to less than 500 nA to maximize battery life during shelf time.
主要特性
！注意：请使用浏览器自带下载，迅雷等下载软件可能无法下载到有效资源。
| 器件 | 类型 | 描述 | 数据手册 |
|---|---|---|---|
| STNS01 | 充电器 | 具有LDO的锂离子线性电池充电器 | 点击下载 |
欢迎加入EEWorld参考设计群，也许能碰到搞同一个设计的小伙伴，群聊设计经验和难点。 入群方式：微信搜索“helloeeworld”或者扫描二维码，备注：参考设计，即可被拉入群。 另外，如您在下载此设计遇到问题，也可以微信添加“helloeeworld”及时沟通。
EEWorld Datasheet 技术支持
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
GD25Q40CEJGR
