加入交流群  

扫一扫,添加管理员微信
备注:参考设计,即可被拉入群
和也在搞设计小伙伴们碰一碰

收藏 

评论 

newlandmark 发布

STM32G431CB MCU的探索套件

B-G431B-ESC1

 
设计简介

The B-G431B-ESC1 Discovery kit is based on the STM32G431CB microcontroller, the L6387 driver and STL180N6F7 power MOSFETs. It is composed of a main power board, and a daughterboard with embedded ST-LINK/V2-1. It is an electronic speed controller (ESC), designed to drive a single 3-phase brushless motor (BLDC/PMSM), performing both sensorless FOC algorithm and 6-step control with a speed regulation, and an active braking function algorithm. The ST sensorless FOC algorithm ensures longer flight times and an optimal dynamic performance. This unit accepts command signal from an external unit for driving and monitoring, for instance a flight control board or equivalent. For this purpose, several communication bus interfaces (UART, CAN, PWM channel) are present. A potentiometer and a user button are available for user application. The daughterboard includes a 5 V battery eliminator circuit (BEC), and the main board embeds an overcurrent/overvoltage and thermal protection circuit. The form factor makes it suitable for small and very light R/C vehicles (FPV race drone) and the motor current capability fits the power requirement of big vehicles, for instance a prosumer drone.

主要特性

  • Full reference design for electronic speed controller capable of both sensorless FOC and 6-step algorithm
  • Designed for drones with up to 6S LiPo battery pack or equivalent suitable DC supply
  • 3-phase driver board for BLDC/PMSM motors with discrete N-channel 60 V, 120 A STripFET F7 power MOSFETs
  • STM32G431CB Arm® Cortex®-M4 32-bit MCU, 213 DMIPS, 128 Kbytes of Flash memory, 32 Kbytes of SRAM, analog rich, math accelerator
  • On-board ST-LINK/V2-1 debugger/programmer detachable from the main board
  • Output peak motor current (maximum peak current tested with propeller to have an air-forced cooling): 40 A
  • Designed with SMD ceramic capacitors with very low profile
  • BEC available through the daughterboard (5 V for external board supply, for example a flight control board)
  • Support for motor sensors (Hall or encoder)
  • Supported by ST Motor Control Software Development Kit (SDK) with ST Motor profiler
  • 3-shunt mode supported for motor current sensing
  • L6387 High voltage high and low-side driver with integrated interlocking function
  • Overcurrent and overvoltage protection feature (OCP/OVP)
  • Thermal measuring and overheating protection with NTC on board
  • ESC ready for communication with any standard flight control unit (FCU): PWM/CAN/UART
  • Potentiometer and user button available on daughterboard
  • Two user LEDs: one green LED for 3.3 V level, and one red LED configurable by the user
  • Target applications: motor driving for R/C vehicles, UAV drone, electric car or boat
  • PCB type and size:
    • FR-4 PCB material
    • 8-layer layout
    • Dimensions (including the daughterboard with ST-LINK part): 30 mm × 41 mm
    • Weight (including the daughterboard with ST-LINK part): 9.2 g
  • RoHS compliant
参考设计图片
×

!注意:请使用浏览器自带下载,迅雷等下载软件可能无法下载到有效资源。

 
群聊设计,与管理员及时沟通

欢迎加入EEWorld参考设计群,也许能碰到搞同一个设计的小伙伴,群聊设计经验和难点。 入群方式:微信搜索“helloeeworld”或者扫描二维码,备注:参考设计,即可被拉入群。 另外,如您在下载此设计遇到问题,也可以微信添加“helloeeworld”及时沟通。

 
查找数据手册?

EEWorld Datasheet 技术支持

论坛推荐 更多
更新时间2024-11-11 01:51:12

 
EEWorld订阅号

 
EEWorld服务号

 
汽车开发圈

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版 版权声明

EEWORLD参考设计中心

站点相关: TI培训 德州仪器(TI)官方视频课程培训

北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved