ADP1047-300-EVALZ、ADP1047 PFC 升压转换器，带 300 瓦评估套件

使用 Analog Devices 的 ADP3303 的参考设计

设计简介

ADP1047-300-EVALZ，评估板在升压功率因数校正 (PFC) 拓扑中的典型 AC/DC 开关电源中使用 ADP1047。该电路设计用于通过 85 VRMS 至 265 VRMS AC 的交流输入电压源提供 385V/300W 的额定负载。 ADP1047 提供有源 PFC 电路所需的所有功能以及精确的交流功率计量。它实现了接近统一的功率因数、输入电流的低失真、输出电压调节、过流保护、交流线路故障检测和保护、过温保护和电源关断

说明

ADP1047-300-EVALZ, Evaluation board uses ADP1047 in a typical AC/DC switching power supply in a boost power factor correction (PFC) topology. The circuit is designed to provide a rated load of 385V/300W from an AC input voltage source of 85 VRMS to 265 VRMS AC. The ADP1047 provides functions all the functions necessary for active PFC circuit plus accurate AC power metering. It achieves near-unity power factor, low distortion of the input current, the output voltage regulation, over current protection, AC line fault detection and protection, over temperature protection and power supply shut-down

主要特色

Conversion Type

AC to DC
Input Voltage

85 to 265 (AC) V
Output Voltage

385 V
Output Power

300 W
Efficiency

95 %
Topology

Boost- PFC

相关器件

器件	类型	描述	数据手册
ADP3634ARDZ	Gate and Power Drivers	Driver 4A 2-OUT Low Side Non-Inv 8-Pin SOIC N EP Tube	点击下载
ADP3634ARDZ-R7	Gate and Power Drivers	Driver 4A 2-OUT Low Side Non-Inv 8-Pin SOIC N EP T/R	点击下载
ADP1047ARQZ-R7	Power Factor Correction - PFC	Power Factor Correction Controller 400kHz 24-Pin QSOP T/R	点击下载