NCV70627 是一款单芯片微步进电机驱动器，带有位置控制器和控制/诊断接口。它是可远程连接 LIN 主站的专用机电一体化解决方案。该芯片通过总线接收定位指令，然后将电机线圈驱动到所需位置。片上位置控制器可配置（OTP 或 RAM）以适应不同的电机类型、定位范围和速度、加速度和减速度参数。NCV70627 充当 LIN 总线上的从站，主站可以从每个单独的从站节点获取特定状态信息，如实际位置、错误标志等。注意：此板必须与 NCV706278FULLGEVK 一起使用。

The NCV70627 is a single-chip micro-stepping motor driver with position controller and control/diagnostic interface. It is ready build dedicated mechatronics solutions connected remotely with LIN master. The chip receives positioning instructions through the bus and subsequently drives the motor coils to the desired position. The onchip position controller is configurable (OTP or RAM) for different motor types, positioning ranges and parameters for speed, acceleration and deceleration. The NCV70627 acts as a slave on LIN bus and the master can fetch specific status information like actual position, error flags, etc. from each individual slave node. Note: This board must be used with the NCV706278FULLGEVK.