RSL10 传感器套件有两种变体：RSL10-SENSE-DB-GEVK（调试版本）RSL10-SENSE-GEVK（基本版本）两种变体都附带 CR2032 纽扣电池和柔性 NFC 天线。在调试 (-DB) 变体上，填充了 10 针调试接头，还附带连接到此接头的 Segger J-Link LITE CortexM 调试器。基本变体上需要针连接器（例如：TC2050）进行调试。蓝牙物联网开发套件 CMSIS-Pack蓝牙物联网开发套件 CMSIS-Pack 包括几个示例应用项目。这些项目允许快速开发各种蓝牙低功耗用例，例如资产监控、资产跟踪、无线传感器网络、工人安全可穿戴设备、能量收集等。应用程序代码可以在受支持的硬件上按原样使用，也可以用作创建更复杂用例的构建块。每个项目都附有详细的文档。Veridify Security 的公钥工具* 使用 Veridify 的 ISO 26262 ASIL D 认证安全工具为 RSL10 实现设备到设备安全性，包括身份验证和数据保护软件。 *注：评估需要 RSL10 传感器开发套件。

There are two variants of the RSL10 Sensor Kit: RSL10-SENSE-DB-GEVK (debug version) RSL10-SENSE-GEVK (base version) Both variants ship with a CR2032 coin cell battery and a flexible NFC Antenna. On the debug (-DB) variant, the 10-pin debug header is populated and a Segger J-Link LITE CortexM debugger that connects to this header is also shipped. A needle connector (E.g.:TC2050 ) is required on the base variant for debugging. Bluetooth IoT Development Kit CMSIS-Pack The Bluetooth IoT Development Kit CMSIS-Pack includes several example application projects. These projects allow for rapid development of various Bluetooth Low Energy use-cases such as asset monitoring, asset tracking, wireless sensor networks, worker safety wearables, energy harvesting, etc. The application code can be used as-is on supported hardware or can be used as a building block in creating a more complex use case. Each of the projects is accompanied by detailed documentation. Veridify Security's Public Key Tools* Implement device-to-device security including authentication and data protection software for the RSL10 using Veridify's ISO 26262 ASIL D certified security tools. *Note: An RSL10 Sensor Development Kit is required for evaluation.