| Input Type | VIN (MIN) (V) |
VIN (MAX) (V) |
IOUT (A) |
Single/Multiple Output |
VOUT (V) |
POUT (W) |
Isolated/Non-Isolated | Topology |
|---|---|---|---|---|---|---|---|---|
| DC | 17 | 60 | 1 | Single | 24 | 24 | Isolated | Flyback |
The MAXREFDES1085 is a miniature, 24V output, isolated power supply that can deliver up to 1A of load current. The design uses the MAX17596 peak-current-mode controller in discontinuous-conduction mode (DCM) flyback topology running at 125kHz. The input voltage range of the MAX17596 is 4.5V to 36V. However, an extra bias winding from the transformer is used to power the controller. This allows the input operating voltage to go up to 60V for this design.
The transformer provides a galvanic isolation of 1500VRMS between the primary and the secondary. In addition, an optocoupler is used to provide secondary side feedback to the controller for voltage regulation while maintaining isolation. This document also discusses a step-by-step procedure to implement this reference design and presents design equations for the calculation of all the design parameters. These equations show how to calculate the component values to allow users to modify this design for their applications.
This board is not available for purchase.
This document describes the hardware shown in above. It provides a detailed systematic technical guide to designing a DC-DC discontinuous conduction mode (DCM) flyback using Maxim’s MAX17596 current-mode controller. The power supply has been built and tested, details of which follow later in this document.
！注意：请使用浏览器自带下载，迅雷等下载软件可能无法下载到有效资源。
| 器件 | 类型 | 描述 | 数据手册 |
|---|---|---|---|
| MAX17596 | MOSFET驱动器和控制器 | 峰值电流模式控制器，用于构建反激和boost稳压器 | 点击下载 |
欢迎加入EEWorld参考设计群，也许能碰到搞同一个设计的小伙伴，群聊设计经验和难点。 入群方式：微信搜索“helloeeworld”或者扫描二维码，备注：参考设计，即可被拉入群。 另外，如您在下载此设计遇到问题，也可以微信添加“helloeeworld”及时沟通。
EEWorld Datasheet 技术支持
京公网安备 11010802033920号
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved
T523W107M016APE0707280
